Water Conditioners

Kordon Pond AmQuel removes chlorine, chloramines, and ammonia safely, easily and quickly, protecting pond fishes and invertebrates by rapidly eliminating three of the most harmful compounds commonly found in pond water. AmQuel turns ammonia into an inert compound for rapid consumption by beneficial bacteria.

• Removes chlorine, chloramines, ammonia and pheromones
• Does not interfere with the biological cycle in your pond
• For water changes, crowded ponds and control of ammonia during nitrogen cycle

16 oz Treats 960 Gallons
1 Gallon Treats 7,693 Gallons
5 Gallons Treats 38,468 Gallons

Directions: 1 oz treats 60 gallons of water. For fast action, add 1-2/3 oz per 100 gallons of water, or 1 capful per 8 gallons of water. A single dose will remove 1 ppm ammonia, 3.2 ppm chloramines and 2.1 ppm chlorine.

Kordon Pond AmQuel removes chlorine, chloramines, and ammonia safely, easily and quickly, protecting pond fishes and invertebrates by rapidly eliminating three of the most harmful compounds commonly found in pond water. AmQuel turns ammonia into an inert compound for rapid consumption by beneficial bacteria.

• Removes chlorine, chloramines, ammonia and pheromones
• Does not interfere with the biological cycle in your pond
• For water changes, crowded ponds and control of ammonia during nitrogen cycle

16 oz Treats 960 Gallons
1 Gallon Treats 7,693 Gallons
5 Gallons Treats 38,468 Gallons

Directions: 1 oz treats 60 gallons of water. For fast action, add 1-2/3 oz per 100 gallons of water, or 1 capful per 8 gallons of water. A single dose will remove 1 ppm ammonia, 3.2 ppm chloramines and 2.1 ppm chlorine.

Kordon Pond NovAqua creates a protective slime coating on a fishs body when the natural slime has been removed due to injury, disease or rough handling. In addition, it adds electrolytes for proper water balance, removes chlorine, copper, hard metals and toxins, and helps stabilize the pH of tap water, making it safe for your pond fish.

• Adds superior protective skin slime-coat
• Adds essential electrolytes
• Detoxifies chlorine, chloramine and toxic metals making tap water safe for fish
• Made in the USA

16 oz Treats 960 Gallons
1 Gallon Treats 7,680 Gallons

The slime coating acts like an invisible bandage on and in your fishes' skin, providing a barrier against serious loss of internal fluids and electrolytes and protects damaged areas of the body against external toxins and disease-causing organisms.

Kordon NovAqua aids in concentrating certain drugs and antibacterials at the diseased or damaged site. NovAqua detoxifies heavy metals and is capable of eliminating free copper ions from solution.

A single dose of Pond NovAqua will detoxify up to 3.75 ppm total chlorine, detoxify copper (up to 1.0 ppm) and reduce or eliminate all other heavy metals in the water. Add electrolytes to ease stress in your fish, such as during acclimation and illness. Increase dosage to remove excess amounts of heavy metals or chlorine.

Directions for Use: SHAKE BOTTLE WELL BEFORE USING. To condition water for all aquatic life, shake the bottle before using and add 1-2/3 fl. oz per 100 gallons of water, or 1 capful per 8 gallons (use the cap on this container for measuring capfuls). Dosage can be increased or repeated without adverse effects. Pond NovAqua does not interfere with fishes' gills or breathing, or the measurements of water quality test kits. If water is suspected of containing chloramines (a chemical complex of chlorine and ammonia) or ammonia, add Kordons Pond AmQuel - a single-step, fast action ammonia/chloramines remover. For fishes with bruises, missing scales, or frayed fins use Kordons Fish Protector as a healing aid.

Non-toxic to humans, pets and aquatic life. For ornamental pond and aquarium fish use only. Not for human, medical or food fish use.

Kordon Pond NovAqua creates a protective slime coating on a fishs body when the natural slime has been removed due to injury, disease or rough handling. In addition, it adds electrolytes for proper water balance, removes chlorine, copper, hard metals and toxins, and helps stabilize the pH of tap water, making it safe for your pond fish.

• Adds superior protective skin slime-coat
• Adds essential electrolytes
• Detoxifies chlorine, chloramine and toxic metals making tap water safe for fish
• Made in the USA

16 oz Treats 960 Gallons
1 Gallon Treats 7,680 Gallons

The slime coating acts like an invisible bandage on and in your fishes' skin, providing a barrier against serious loss of internal fluids and electrolytes and protects damaged areas of the body against external toxins and disease-causing organisms.

Kordon NovAqua aids in concentrating certain drugs and antibacterials at the diseased or damaged site. NovAqua detoxifies heavy metals and is capable of eliminating free copper ions from solution.

A single dose of Pond NovAqua will detoxify up to 3.75 ppm total chlorine, detoxify copper (up to 1.0 ppm) and reduce or eliminate all other heavy metals in the water. Add electrolytes to ease stress in your fish, such as during acclimation and illness. Increase dosage to remove excess amounts of heavy metals or chlorine.

Directions for Use: SHAKE BOTTLE WELL BEFORE USING. To condition water for all aquatic life, shake the bottle before using and add 1-2/3 fl. oz per 100 gallons of water, or 1 capful per 8 gallons (use the cap on this container for measuring capfuls). Dosage can be increased or repeated without adverse effects. Pond NovAqua does not interfere with fishes' gills or breathing, or the measurements of water quality test kits. If water is suspected of containing chloramines (a chemical complex of chlorine and ammonia) or ammonia, add Kordons Pond AmQuel - a single-step, fast action ammonia/chloramines remover. For fishes with bruises, missing scales, or frayed fins use Kordons Fish Protector as a healing aid.

Non-toxic to humans, pets and aquatic life. For ornamental pond and aquarium fish use only. Not for human, medical or food fish use.

Microbe-Lift Aquatic Turtle Extreme Water Conditioner is a full-function water conditioner in a single product. It has been formulated to condition new water (instantly ?ages?). It should be used when setting up a new tank, making water changes, and adding new turtles.

• Removes Ammonia, Chlorine, and Chloramine
• Detoxifies Heavy Metals
• Extreme Water Conditioner for Aquatic Turtles

Microbe-Lift Aquatic Turtle Extreme Water Conditioner removes both ammonia and chlorine by chemically reacting with them keeping your turtle healthy and happy. Aquatic Turtle Extreme Water Conditioner detoxifies heavy metals (e.g. copper and lead) by both chelation and precipitation.

Recommended: Perform regular water changes to keep the alkalinity (acid-neutralizing capacity) and pH stable. Use Microbe-Lift Extreme Water Conditioner, at the standard dosage rate, to eliminate and control each measured 1 mg/L, or fraction thereof, of total ammonia. Use a salicylate (indolphenol) type total ammonia test kit.

A liquid extract of barley straw especially helpful where bottom drains are present. An environmentally responsible, cost-efficient pond conditioner that is a clean and easy, natural and organic approach to a healthy pond environment.

• An Environmentally Responsible, Cost Efficient Pond Conditioner
• Clean And Easy
• Natural and organic approach to a health pond environment
• Goes To Work On Contact
• An environmentally responsible, cost efficient pond conditioner

A liquid extract of barley straw especially helpful where bottom drains are present. An environmentally responsible, cost-efficient pond conditioner that is a clean and easy, natural and organic approach to a healthy pond environment.

• An Environmentally Responsible, Cost Efficient Pond Conditioner
• Clean And Easy
• Natural and organic approach to a health pond environment
• Goes To Work On Contact
• An environmentally responsible, cost efficient pond conditioner

Keeps Birdbaths Water Clean & Clear Specially Formulated for Birdbaths Inhabited by Birds, Small Fish, Frogs, etc. Prevents organic and inorganic contaminants from forming (i.e. crusty white scale deposits, iron, copper and hard water stains). Uses two unique proprietary technologies: One system helps to prevent the buildup of stains and mineral deposits on the birdbath or fountain surface. The second system uses bio-enzymatic activity to keep water clear and free from the organic debris that can make the water cloudy.

• Helps keep birdbath water clear
• Natural & Safe Biodegradable and Environmentally Friendly. Safe for Humans and Pets!
• Prevents organic and inorganic contaminants from forming (i.e. crusty white scale deposits, iron, copper and hard water stains).
• Keeps Birdbaths Water Clean & Clear Specially Formulated for Birdbaths Inhabited by Birds, Small Fish, Frogs, etc.
• 4 oz. (10BBC4) for 17 treatments.

INSTRUCTIONS/INGREDIENTS

Microbe-Lift/BMC kills developing mosquitoes before they become breeding, biting adults. It is a liquid product, so it has no adverse effect on the aesthetics of ponds and water features. Microbe-Lift/BMC can be applied to areas that can contain aquatic life, fish and plants. It can also be applied to areas used by or in contact with humans, animals, horses, livestock, pets, birds or wildlife.

• Disperses easily in water
• No fish toxicity
• No toxicity to non-target invertebrates
• Significantly lowers potential for development of resistance in target insect populations than chemical larvicides such as methoprene
• No organic or inorganic residues

Microbe-Lift Aquatic Planting Media is made of 100% natural montmorillonite with an added beneficial bacteria to help with pond clarity. The neutral pH pebbles in Microbe-Lift Aquatic Planting Media contain beneficial bacteria, retain oxygen, and help absorb excess alkalinity for improved pond water quality. When used in a bog area, Microbe-Lift Aquatic Pond Plant Media helps reduce transplant shock, allow for more efficient utilization of light, water and nutrients and retain water keeping the bog moist but not waterlogged. Microbe-Lift Aquatic Planting Media will not break down, float, or cloud pond water. Microbe-Lift Aquatic Planting Media contains no algae-promoting nutrients, fertilizers, compost, peat, or harmful pesticides and is safe for use in ponds with fish.

• Ideal when potting aquatic plant
• Enormous surface area perfect to colonize beneficial nitrifying bacteria
• Allows mixing any ratio of loam to plant media, Nontoxic to plants
• Will not break down, float or cloud pond water
• Encourages Plant Health

Specially formulated for larger water fountains and for indoor and outdoor waterfalls. Will help ensure clear, sparkling water that keeps water filters and pumps free from organic debris. Safe for birds, fish, aquatic wildlife, humans, pets, aquatic plants and lawns. All natural ingredients. Biodegradable and nontoxic. 16 oz.

• Will help ensure clear, sparkling water that keeps water filters and pumps free from organic debris
• Safe for birds, fish, aquatic wildlife, humans, pets, aquatic plants and lawns
• All natural ingredients
• Biodegradable and nontoxic

Microbe-Lift Sludge-Away naturally speeds up the elimination of slow degrading organic sludge and muck from ponds, especially which contain rock or gravel. This organic and microbial-based method prevents toxic gasses from deriving off of hard-to-reach accumulated organic matter, protecting your fish, plants as well as marine life while clarifying your water at the same time.

• Speeds up the elimination of organic sludge & muck
• 100% active, organic & microbial-based ingredients
• Protects your fish and pond from arising toxic gasses
• This quickly disperses & is safe for the environment
• 1 gallon of water treats a 500 gal pond for 5 weeks

Microbe-Lift Special Blend helps to break down decaying organic matter and cycle elements like nitrogen and sulfur to prevent them from building up in your aquarium. This formula will reduce water changes and cleaning maintenance with chemical free ingredients, by lowering ammonia levels and nitrates while removing odors, clarifying water and breaking down protein foam as well as residue on gravel, plants and rocks. As this Special Blend sustains your aquarium water, plant growth is naturally stimulated while light, water and nutrients are better absorbed into plants for freshwater and saltwater aquariums. This biological maintainer is suitable to use as an aquarium starter for biological cycling and boosting. Activated carbon and copper based products are compatible with this formula.

• Helps to break down decaying organic matter and cycle elements
• Reduces maintenance & lowers ammonia and nitrates from water
• Breaks down protein foam and residue on gravel, plants and rocks
• Odors will be eliminated and water clarification will be activated
• Plant growth is naturally stimulated and presents better absorption

Microbe-Lift Special Blend helps to break down decaying organic matter and cycle elements like nitrogen and sulfur to prevent them from building up in your aquarium. This formula will reduce water changes and cleaning maintenance with chemical free ingredients, by lowering ammonia levels and nitrates while removing odors, clarifying water and breaking down protein foam as well as residue on gravel, plants and rocks. As this Special Blend sustains your aquarium water, plant growth is naturally stimulated while light, water and nutrients are better absorbed into plants for freshwater and saltwater aquariums. This biological maintainer is suitable to use as an aquarium starter for biological cycling and boosting. Activated carbon and copper based products are compatible with this formula.

• Helps to break down decaying organic matter and cycle elements
• Reduces maintenance & lowers ammonia and nitrates from water
• Breaks down protein foam and residue on gravel, plants and rocks
• Odors will be eliminated and water clarification will be activated
• Plant growth is naturally stimulated and presents better absorption

Microbe-Lift Special Blend helps to break down decaying organic matter and cycle elements like nitrogen and sulfur to prevent them from building up in your aquarium. This formula will reduce water changes and cleaning maintenance with chemical free ingredients, by lowering ammonia levels and nitrates while removing odors, clarifying water and breaking down protein foam as well as residue on gravel, plants and rocks. As this Special Blend sustains your aquarium water, plant growth is naturally stimulated while light, water and nutrients are better absorbed into plants for freshwater and saltwater aquariums. This biological maintainer is suitable to use as an aquarium starter for biological cycling and boosting. Activated carbon and copper based products are compatible with this formula.

• Helps to break down decaying organic matter and cycle elements
• Reduces maintenance & lowers ammonia and nitrates from water
• Breaks down protein foam and residue on gravel, plants and rocks
• Odors will be eliminated and water clarification will be activated
• Plant growth is naturally stimulated and presents better absorption

Microbe-Lifts Xteme Water Conditioner is a buffered liquid water conditioner for aquariums which removes and detoxifies chlorine and ammonia wile destroying chloramines. Nitrite, copper and heavy metals are also detoxified while the waters alkalinity boosts.

• Detoxifies Nitrite
• Destroys and removes Chloramines
• 4oz treats up to 240 gallons.
• Removes Ammonia

Microbe-Lifts Xteme Water Conditioner is a buffered liquid water conditioner for aquariums which removes and detoxifies chlorine and ammonia wile destroying chloramines. Nitrite, copper and heavy metals are also detoxified while the waters alkalinity boosts.

• Detoxifies Nitrite
• Destroys and removes Chloramines
• 4oz treats up to 240 gallons.
• Removes Ammonia

Nutrafin Betta Plus - Tap Water Conditioner makes tap water safe for bettas by neutralizing chlorine, chloramine and undesirable metals. Betta Plus protects fish scales and fins, reduces nitrite toxicity, and helps reduce stress. It also helps reduce inflammation and undesirable conditions that can arise from scrapes, torn fins, and abrasions. Betta Plus also contains tropical almond leaf extract, a natural element found in betta habitats, that conditions and supports a betta-friendly environment, allowing them to thrive and show their full-color potential.

• Makes Tap Water Safe for Bettas
• Protects Scales and Fins
• Contains Tropical Almond Leaf Extract
• Helps to Reduce Stress
• Helps Reduced Inflammation from Scrapes, Torn Fins and Abrasions

INSTRUCTIONS: Shake well before using. 5 mL (approx. 1 capful) treats 2 L (0.5 U.S. gal) with every water change.

Nutrafin Goldfish Bowl Conditioner - Tap Water Conditioner for Goldfish instantly removes chlorine and chloramine from tap water. It also makes existing water in fish bowls safe by instantly binding and neutralizing toxic ammonia and detoxifying heavy metals.

• Goldfish Bowl Conditioner
• Instantly Removes Chlorine and Chloramine
• Neutralizes Toxic Ammonia
• Detoxifies Heavy Metals

INSTRUCTIONS: Shake well before using. Use with each water change 5mL (appox. 1/2 capful) treats 2 US gallons

Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.

• Lowers aquarium pH and buffers from 6.0 to 8.0
• Converts alkalinity into CO2
• For the planted aquarium or very hard water

Seachem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Directions: To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters.

Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.

• Lowers aquarium pH and buffers from 6.0 to 8.0
• Converts alkalinity into CO2
• For the planted aquarium or very hard water

Seachem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Directions: To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

• Adjusts pH to 5.8 - 6.8
• Helps to replicate the ideal Discus environment
• Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

• Adjusts pH to 5.8 - 6.8
• Helps to replicate the ideal Discus environment
• Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

• Garlic additive and flavor enhancer
• Renews interest of poor or finicky eaters
• Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

• Garlic additive and flavor enhancer
• Renews interest of poor or finicky eaters
• Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

• Garlic additive and flavor enhancer
• Renews interest of poor or finicky eaters
• Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

• Parasite Control for marine or freshwater aquariums
• Contains no toxic methanol and will not alter pH
• Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

• Parasite Control for marine or freshwater aquariums
• Contains no toxic methanol and will not alter pH
• Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

• Parasite Control for marine or freshwater aquariums
• Contains no toxic methanol and will not alter pH
• Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.