Other Filter Parts

API Filstar XP M Replacement Impeller, Shaft and Bearing is a replacement impeller for old or damaged impellers in your Filstar XP M

• Replacement impeller for Filstar XP M
• Includes Rotor, shaft and bearing

The Rena Filstar XP4 Impeller Kit replaces your old, worn out or broken aquarium canister filter impeller. Replacing an old impeller is essential to keep your filter running with optimum power and efficiency.

• Includes rotor, shaft and bearing
• Fits Rena Filstar XP4 external filter
• Replaces old or degraded impeller

Old, uncared-for impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation. Filters and impellers should be cleaned and maintained regularly to extend the life of your parts and system.

AquaClear Ammonia Remover Filter Inserts are natural ammonia removing filter media. Ammonia Remover is effective in freshwater aquariums for the control and removal of ammonia.

• Removes and controls harmful ammonia
• Ideal for new to heavily populated aquariums
• Alternate chemical stage

The use of AquaClear Ammonia Remover is strongly recommended on a consistent basis for the control of potential ammonia surges and/or when biological conversion of toxic ammonia is compromised or impossible. For freshwater use only. Choose the size that fits your AquaClear filter.

Specifications:
20 Gallon: 5-20 gallon aquariums
30 Gallon: 10-30 gallon aquariums
50 Gallon: 20-50 gallon aquariums
70 Gallon: 40-70 gallon aquariums
110 Gallon: 60-110 gallon aquariums

AquaClear Filter Insert Foam performs mechanical filtration by trapping particles and debris as they pass through the insert. This unique foam, designed for use with AquaClear Power Filters, features optimal pore size for efficient mechanical and biological filtration.

• Traps particles and debris and enhances biological filtration
• Tailored fit prevents water bypass for optimal
• Safe for fresh and saltwater use

Sizing:
Size 20: 5-20 gallon aquariums
Size 30: 10-30 gallon aquariums
Size 50: 20-50 gallon aquariums
Size 70: 40-70 gallon aquariums
Size 110: 60-110 gallon aquariums

This Aquatop Replacement Quartz Sleeve Cover fits the CF500-UV Canister Filter. The quartz sleeve is a protective glass tube cover for the UV bulb.

• Replacement quartz sleeve for CF500-UV Filter
• Glass cover for UV bulb
• Genuine Aquatop factory replacement part

This Aquatop Replacement Quick Disconnect Valve fits the CF500-UV Canister Filter and CF-500UVMKII. O-rings are included for secure seals. This is a genuine Aquatop factory replacement part.

• Replacement quick disconnect valve for Aquatop CF500-UV Canister Filter and CF-500UVMKII
• Includes 1 O-Ring
• Genuine Aquatop replacement part

Aqueon Water Polishing Pads trap fine particles and debris to improve overall water appearance and quality while providing mechanical filtration in Aqueon QuietFlow Canister Filters. Aqueon Filter Media pads are ideal for both fresh and saltwater use.

• Mechanical filtration pads for Aqueon QuietFlow Canister Filters
• Traps micro particles and debris
• Improves overall appearance and water quality
• Ideal for fresh and saltwater use

Small:
Fits QuietFlow 200 (#100107312)

Large:
Fits QuietFlow 300 (#100107313) and QuietFlow 400 (#100107314)

Becketts Replacement / Add on Pre-Filter is for G210, G325, and G535 pumps. This pre-filter will protect the pump from pond debris and helps maintain clean and clear water.

• Fits Beckett G210, G325, and G535 pumps
• Protects the pump from pond debris
• Helps maintain clean and clear water
• Package contains 2 foam filters and 1 plastic insert

Dimensions: 6" Length, 1.25" Inner Diameter, 2.75" Outer Diameter.

Cascade 1000 Canister Filter Motor Unit replacement part. Penn Plax Cascade 1000 Canister filter Motor Unit DOES match their manufacturer sku of CCF214.

• Replacement Cascade 1000 Canister Filter Motor Unit
• Cascade 1000 Replacement Motor only
• Does not include impeller - sold separately

NOTE: The impeller, and impeller housing are NOT INCLUDED! Make sure you put the impeller and impeller housing into the new motor when it arrives so that the motor can pump water into the filter. Or you may purchase them seperately.

The Cascade 1500 Impeller replaces the impeller for the Cascade 1500 canister filter. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Cascade 1500 canister filter
• Includes impeller, shaft and magnet

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Note: For the Cascade 1500 canister filter only. Cascade 1000 and 1200 models each require different impellers.

Cascade 1500 Canister Filter Motor Unit replacement part. Penn Plax Cascade 1500 Canister filter Motor Unit DOES match their manufacturer sku of CCF314.

• Replacement Cascade 1500 Canister Filter Motor Unit
• Cascade 1500 Replacement Motor Only
• Does Not Include Impeller - Sold Separately

NOTE: The impeller, and impeller housing are NOT INCLUDED! Make sure you put the impeller and impeller housing into the new motor when it arrives so that the motor can pump water into the filter. Or you may purchase them seperately.

Hagen Fluval Canister Filter Motor Seal Ring is a replacement part for Fluval 305, 306, 405 and 406 canister filters. Replacing the seal ring is important to maintain a proper seal and prevent possible damage to the motor.

• Replacement motor seal ring for Fluval aquarium filters
• Fits Fluval 305, 306, 405 and 406 canister filters
• Maintains proper seal, prevents leaking and damage

Hagen Impeller Cover Fluval replacement part. Impeller Cover Replacement part for the Fluval 304-404 and 305-405 Filters made after July 2001.

• Replacement impeller cover for Hagen Fluval filters
• Fits Fluval models 304-404 and 305-405
• For models with straight impeller blades made after July 2001

NOTE: Please make sure your impeller has straight fan blades. (If your filter is older than July 2001 and/or has curved fan blades then you will need to purchase the OLD MODEL: Part Number A-20155)

Lees Fish Saver Elbows are replacement parts and additions for existing Lees Under Gravel Filter Systems in aquariums. Fish Saver Elbows will fit Lees Premium, Original and Economy filters, and any 1" uplift tube.

• Replacement parts for Lees Under Gravel Aquarium Filters
• Fit Lees Premium, Original and Economy filters, and any 1" uplift tube
• Protect fish from the filter and vice versa

Lees Undergravel Plate Connectors anchor your Lees Undergravel Filter firmly to the floor of your aquarium, providing it with the structural integrity and solid foundation to keep it purifying your tank.

• Multi-level design enhances filters structural integrity
• Hard plastic plates resist splitting and cracking
• Includes T-ring for easy connection

Fits Lees Original and Economy Undergravel Filters only.

Lees Uplift tube knockout plugs. Fits Lees under-gravel filters. Great for when you switch from an air pump to a power head, or any time you need to remove an uplift tube from your filter plate. Pack of 4 plugs for uplift tube holes.

• Fits Lees under-gravel filters
• For when switching from an air pump to a power head
• Useful anytime you need to remove an uplift tube from your filter plate

The OD of the plug is 1 1/8". This is without opening the manufacturers packaging.

Lees Undergravel Uplift Tubing Assembly contains replacement parts for Lees Economy and Original Undergravel Aquarium Filters. This set includes an elbow, plate connector, telescoping ring and 1" uplift tube.

• Replacement uplift tube assembly
• Fits Lees Original and Economy Undergravel Filters
• Telescoping feature allows an additional 2.5" lift

Lees Undergravel Uplift Tubing Assembly contains replacement parts for Lees Economy and Original Undergravel Aquarium Filters. This set includes an elbow, plate connector, telescoping ring and 1" uplift tube.

• Replacement uplift tube assembly
• Fits Lees Original and Economy Undergravel Filters
• Telescoping feature allows an additional 2.5" lift

Lees Undergravel Uplift Tubing Assembly contains replacement parts for Lees Economy and Original Undergravel Aquarium Filters. This set includes an elbow, plate connector, telescoping ring and 1" uplift tube.

• Replacement uplift tube assembly
• Fits Lees Original and Economy Undergravel Filters
• Telescoping feature allows an additional 2.5" lift