Treats (Packaged)

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons.

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:.

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons.

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:.

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Clarity is the ultimate clarifier for both fresh and saltwater. It employs an advanced polymeric flocculating agent that is both reef and plant safe. Clarity is the only clarifier on the market that does it all!.

• Water clarifier for fresh and saltwater aquariums
• Helps clear cloudy water fast
• Safe for use in live plant and reef tanks

Seachem Clarity will clear all types of clouding, including: bacterial and other biological type blooms, chemical clouding, and particulate clouding (i.e. stirred up gravel bed). When Clarity clears up bacterial clouding it helps to accelerate and enhance the colonization of the biological filter by efficiently relocating these natural biofilms to the biosupport media in the filter.

Directions: Use 1 capful (5 mL) for every 20 gallons. In some situations the cloudiness may increase slightly after adding Clarity, however this is normal and is a sign that Clarity is actively working. Rapid clarification will follow.

Seachem CoralCrete Epoxy Adhesive securely attaches coral to decorative rockwork in freshwater, marine and reef aquariums. This two-part epoxy putty may also be used to fuse together a stable rockwork foundation for future coral growth. Available in gray or purple, CoralCrete is a must-have for aquariums with branching, polyp, or plating corals.

• Secures coral to rockwork
• Fully cures submerged or emerged within 24 hours
• Matches synthetic reef rock
• Safe for marine & freshwater aquariums

Directions: For sensitive skin, wear latex gloves. Cut off desired amount of CoralCrete. Replace unused CoralCrete into plastic storage tube. Remove film and knead CoralCrete together until uniform color is achieved. Once mixed, CoralCrete can be used to adhere coral or rock, either submerged or emerged. Press firmly around base or contact point of coral or rock to ensure CoralCrete penetrates pores and surface grooves. Curing begins in about 5 minutes, hardening in about 15 minutes. CoralCrete cures fully in 24 hours. Protein Skimmers may over-activate during cure time.

Note: There is no functional difference between the purple and gray epoxies. Choose whichever color best matches your rock and coral coloring.

Cuprisorb is a powerful adsorbent of copper and heavy metals. Cuprisorb will remove copper more rapidly and efficiently than carbon and is thus ideal for emergency copper removal. It extracts All types of copper, including chelated copper, and remains effective until it turns a deep blue-black color. It may be regenerated repeatedly. If placed in continuous use, it will gradually extract even precipitated copper from the gravel/substrate bed as well. Cuprisorb will allow maintenance of invertebrates in copper-treated tanks by removing copper leaching from substrates.

• Powerful adsorbent of copper and heavy metals
• Copper specific chelating resin
• Removes all types of copper

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

Seachem Filter Socks remove suspended particulates from the water column down to 100 microns, providing exceptional purity and water quality. These socks are built to last, with durable welded seams and a singed finish to reduce wear and prevent the reintroduction of debris to your aquarium.

• Unparalleled particulate removal for outstanding water quality
• Durable welded seams reduces wear
• 100 micron rating traps even the smallest debris
• Plastic collar fits standard sump fittings for easy installation

100 Micron Rating. One micron is on millionth of a meter (or one thousandth of a millimeter). These socks have a mesh size of 100 microns, allowing them to trap even the smallest particles and debris.

Easy Installation and Maintenance. Rinse before use. Fit Seachem Filter Sock into any standard sump or overflow system made for collared filter socks. Remove as necessary for cleaning. Under normal use, cleaning can be accomplished by simply rinsing with a high-pressure hose. For more aggressive cleaning, soak in 1:10 solution of bleach and water for 24 hours and then rinse thoroughly with a high-pressure hose. It can also be cleaned in a standard clothes washing machine; wash on a moderate setting with a cup of bleach added to the wash cycle. Once the normal rinse cycle is complete, Seachem Filter Sock is ready for use.

Sizing:
Small: 10 x 30 cm / 4" x 12" (10 cm / 4' plastic collar)
Large: 17.5 x 40.5 cm / 7" x 16" (17.5 cm / 7" plastic collar).

Struggling with your aquatic hardscape designs Well, Seachem has a solution for you! Flourish Epoxy is a powerful epoxy adhesive that helps safely and securely create planted aquarium hardscape designs out of materials such as rocks and driftwood. Simply balancing large piles of rocks in the aquarium can result in these structures collapsing and damaging your aquarium or worse, harming your fish. Instead of leaving it up to chance, use Flourish Epoxy to secure your hardscapes. For added benefit, the solution is incredibly fast-acting, with a working time of only 5 minutes and will fully cure both submerged or emerged within 24 hours! Completely safe for even the most sensitive aquarium inhabitants.

• Powerful epoxy adhesive
• Ideal for planted tank hardscapes
• Safely secures rocks and driftwood
• Fully cures within 24 hours
• Safe for all aquarium inhabitants

The epoxy is brown in color and comes in a 4 oz tube.

Struggling with your aquatic hardscape designs Well, Seachem has a solution for you! Flourish Epoxy is a powerful epoxy adhesive that helps safely and securely create planted aquarium hardscape designs out of materials such as rocks and driftwood. Simply balancing large piles of rocks in the aquarium can result in these structures collapsing and damaging your aquarium or worse, harming your fish. Instead of leaving it up to chance, use Flourish Epoxy to secure your hardscapes. For added benefit, the solution is incredibly fast-acting, with a working time of only 5 minutes and will fully cure both submerged or emerged within 24 hours! Completely safe for even the most sensitive aquarium inhabitants.

• Powerful epoxy adhesive
• Ideal for planted tank hardscapes
• Safely secures rocks and driftwood
• Fully cures within 24 hours
• Safe for all aquarium inhabitants

The epoxy is gray in color and comes in a 4 oz tube.

Seachem Flourish Phosphorus helps accelerate and enhance the growth of live aquarium plants, without contributing to nuisance algae growth. This simple, safe solution contains no nitrates, allowing precise phosphorus dosing to meet your plants needs.

• Phosphorus supplement for the planted aquarium
• Safe solution (4,500 mg/L) of potassium phosphate
• Contains no nitrate and does not contribute to algae growth

Flourish Phosphorus supplies an ideal concentration (4,500 mg/L) of phosphorus, one of the three macro nutrients required for healthy plant growth (the others are nitrogen and potassium). Unlike competing products, it is nitrate-free and allows you to accurately dose your aquariums phosphate levels without the risk of overdosing nitrates. Use Flourish Phosphorus along with Flourish Nitrogen and Flourish Potassiumto achieve an ideal ratio of all three nutrients.

Directions:
Beginner: Use 2.5 mL (half a cap) for each 80 L (20 gallons) once ot twice a week or as needed in response to signs of phosphorus deficiency (such as stunted growth and/or very dark green coloring).

Expert: The beginner dose raises phosphorus by 0.05 mg/L (0.15 mg/L phosphate). The ideal phosphate level will vary, but generally ranges from 0.15-1.0 mg/L. Use a reliable test kit to monitor phosphate levels. To target a specific phosphate increase, dose according to the following formula: 0.8vp=m, where v=volume of tank in gallons, p=desired phosphate increase and m=volume of product to use (in mL). For example, to raise 20 gallons to 0.1 mg/L phosphate you would use: 0.8x20x0.1=1.6 mL.

Guaranteed Analysis:
Total Phosphate (P2O5) - 0.3%
Soluble Potash (K2O) - 0.2%.

Seachem Garlic Guard is an appetite and flavor enhancer for freshwater and saltwater fish. Garlic Guard contains allicin (the naturally derived, active ingredient found in garlic), which has been demonstrated to possess health-promoting benefits, and will help renew the interest of poor or finicky eaters.

• Garlic additive and flavor enhancer
• Renews interest of poor or finicky eaters
• Suitable for fresh or saltwater; reef and plant safe

Allicin possesses strong antioxidant properties (similar to Vitamin C) which promote enhanced health through elimination of free radicals. For enhanced health benefits, Seachem Garlic Guard also contains Vitamin C. Safe for freshwater, marine and reef aquariums.

Directions for Use: Shake well before use. Soak food in Garlic Guard before feeding.

Guaranteed Analysis:
Garlic Extract - 9900 ppm
Allicin (active ingredient) - 130 ppm
Vitamin C - 1000 ppm.

Seachem Zip Bags are secure filter bags that feature durable seams and a corrosive-proof zipper.

• Large Mesh Zip Bag Dimensions: 19"L x 17"W
• Easily Holds 1 Liter of Filter Media
• Durable Seams
• Corrosion-Proof Zipper
• No Strings or Ties
• Excellent Choice for Biomedia Such as Matrix

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

SeaChem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. SeaChem PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow.

• Removes phosphate and silicate from fresh and saltwater systems
• Highly porous and bean-shaped for maximum absorption and water flow
• Causes a decline in hair algae and enhanced coral growth

SeaChem Phosguard outperforms all competing products. PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/l phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use.

Instructions: Use 1 cup for every 75 gallons. Leave product in place for 4 days, then test phosphate and silicate.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:.

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons.

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:.

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons.

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:.

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons.

Seachem Purigen Ultimate Filtration is a premium synthetic adsorbent that, unlike any other filtration product, is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%.

• Removes soluble and insoluble impurities from water
• Controls ammonia, nitrites, nitrates
• Polishes water to unparalleled clarity

Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigens impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use.

Why Its Different:.

• Selectivity: Purigen is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen has barely begun to reach its potential. Purigen generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen removes that waste faster and more completely than anything else on the market.
• Capacity: Purigens possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
• Regeneration: Purigen can also be regenerated. As it adsorbs waste products, Purigen will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off" the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.

Directions:
Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metalic container in a well ventilated area and away from children. Rinse well, then soak for 8 hours with a solution containing 2 tablespoons of ChlorGuard, Prime, or equivalent dechlorinator per cup of water. Rinse well. Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Dosage:
100 ml (Media Bag): Treats 106 Gallons
250 ml: Treats 265 Gallons
500 ml: Treats 530 Gallons
1 Liter: Treats 1,060 Gallons
2 Liters: Treats 2,120 Gallons.

Seachem Reef Advantage Calcium is a non-caustic (pH 8.3-8.6) optimized blend of ionic calcium designed to restore and maintain calcium levels to those found in natural seawater. Note that if either calcium or carbonates become deficient, coral growth will cease, followed by a rapid decline in coral health.

• Raises calcium to natural seawater levels
• Capable of raising 20 gallons of water by 25 ppm of calcium with only 1 teaspoon
• Non-caustic and pH balanced (pH 8.3-8.6)
• Maintains magnesium and strontium, will not deplete alkalinity

In addition to calcium, Reef Advantage provides magnesium and strontium in amounts proportionate to typical utilization ratios (100:5:0.1, Ca:Mg:Sr), helping to maintain three critical elements at once. Unlike limewater (kalkwasser), Reef Advantage Calcium does not have a caustic pH and will not deplete magnesium. When used as directed, it will not deplete alkalinity.

Directions:
BEGINNER: Use 5 g (1 level teaspoon) per 150 L (40 US gallons) twice a week. For precise dosing, use the Seachem Digital Spoon Scale. Dissolve in at least 250 ml (1 cup) of freshwater. Check calcium every 2 weeks and adjust amount or frequency accordingly.

ADVANCED: Check calcium level, then follow addition regimen above until calcium is adjusted to 380–420 mg/L. Each 5 g/150 L will raise calcium by about 12 mg/L. Quantity or frequency can be adjusted, but do not exceed 10 g/150 L per day. Thereafter, use as required to maintain calcium.

EXPERT: After determining the calcium consumption rate, set up a continuous drip system. Use the following formula to determine how much to add to your top-off water: m=vc/400 (m=grams to add to top off water, v=volume of tank in liters, c=amount to raise calcium in mg/L). [For reference: 1 gallon=3.8 liters, 5 g=1 teaspoon].

DO NOT OVERDOSE: Excess calcium may enhance the loss of carbonate alkalinity. Do not directly mix with any carbonate supplement. Best if calcium and carbonate additives are added on alternate days or at least 30 minutes apart.

Ingredients: Calcium Chloride, Magnesium Chloride, Strontium Chloride.

Guaranteed Analysis:
Calcium (Ca) (min) - 335 mg; (max) - 347 mg
Magnesium (Mg) (min) - 17 mg
Strontium (Sr) (min) - 0.34 mg.

Seachem Reef Builder supplies the carbonates and calcium which are essential for all coral growth. It also raises carbonate alkalinity without immediately impacting water pH, and will stabilize aquarium water at pH 8.3 with long term use.

• Raises carbonate alkalinity (KH) with minimal pH impact
• Provides a blend of carbonate sources that will not lower pH
• Will not deplete calcium, magnesium, or strontium
• Promotes healthy coral growth

If either calcium or carbonates become deficient, coral growth will cease, followed by a rapid decline in coral health. Used as directed, Seachem Reef Builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity.

Seachem Reef Builder and Reef Buffer may be used together: use Reef Builder to raise carbonate alkalinity without affecting pH, and use Reef Buffer to raise carbonate alkalinity and pH. As a general rule, reef alkalinity should be maintained at 3–5 meq/L (8–14 dKH); alkalinity should not be allowed to fall below 2 meq/L.

Directions:
BEGINNER: Use 3 g (1/2 level teaspoon) per 150 L (40 gallons) twice a week. Dissolve in at least 250 ml (1 cup) of freshwater. Check alkalinity every 2 weeks and adjust amount or frequency accordingly. For precise dosing, use the Seachem Digital Spoon Scale.

ADVANCED: Check alkalinity, then follow addition regimen above until alkalinity is adjusted to 4–5 meq/L. Each 3 g/150 L will raise alkalinity by about 0.25 meq/L. Quantity or frequency can be adjusted, but do not exceed 12 g/150 L per day. Thereafter, use as required to maintain alkalinity.

EXPERT: After determining the alkalinity consumption rate, set up a continuous drip system. Use the following formula to determine how much to add to your top–off water: m=0.08va (m=grams to add to top off water, v=volume of tank in liters, a=amount to raise alkalinity in meq/L). For example, if you want to raise your alkalinity by 1 meq/L in a 200 liter tank, then you would add 0.08x200x1=16 g into the top–off water. [For reference: 1 gallon=3.8 liters, 6 g=1 teaspoon].

DO NOT OVERDOSE: Excess alkalinity may enhance the loss of calcium, magnesium, and strontium. Do not directly mix with any calcium, magnesium, or strontium supplement. Best if calcium and carbonate additives are added on alternate days or at least 30 minutes apart.

Reef Complete is a concentrated (160,000 mg/L) optimized blend of ionic calcium designed to restore and maintain calcium to levels found in natural seawater without affecting pH. Calcium and carbonates are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. To prevent this you must provide calcium (Reef complete) and carbonates (Reef Builder or Reef Carbonate) Reef Complete also includes magnesium and strontium in amounts proportionate to typical utilization ratios (100:5:0.1, Ca:Mg: Sr). This allows one to maintain these two important elements while maintaining calcium. Reef Complete is a blended product. It is not simply calcium chloride. Commercially available calcium chloride contains ammonia. Unlike other ionic calcium supplements, Reef Complete is blended to a higher pH to force the ammonia to gas off into the atmosphere. Also, Reef Complete is more concentrated than any other liquid product on the market. Reef Complete contains 160,000 ppm calcium.

• Liquid Ionic Calcium Source
• Maintains Magnesium & Strontium
• Raises Calcium
• Essential to Coral Growth
• Will Not Affect pH

INSTRUCTIONS: Beginner: Use 1 capful (5 mL) per 80 L (20 US gallons) twice a week. Check calcium every 2 weeks and adjust the amount or frequency accordingly.

Advanced: Check calcium level (use Reef Status: Calcium to measure calcium), then follow the addition regimen above until calcium is adjusted to 380-420 mg/L. Each 5 mL/80 L (20 US gallons) will raise calcium by about 10 mg/L. Quantity or frequency can be adjusted, but do not exceed 12.5 mL/80 L (20 US gallons) per day. Thereafter, use as required to maintain calcium.

Expert: After determining the calcium consumption rate, set up a continuous drip system. Use the following formula (or skip the math and use our Dosage Calculator) to determine how much to add to your top-off water: m=vc/160 (m=mL of product to add to top-off water, v=volume of the tank in liters, c=amount to raise calcium in mg/L). [For reference: 1 US gallon=3.8 L].

If used with Reef Calcium, it is not necessary to exceed 380 mg/L total calcium. Use Reef Status: Calcium to measure calcium.

DO NOT OVERDOSE: Excess calcium may enhance the loss of carbonate alkalinity. Do not directly mix with any carbonate supplement. Best if calcium & carbonate additives are added on alternate days or at least 30 minutes apart.

INGREDIENTS: Amounts per 1g Calcium (Ca) (min)

Seachem Safe Powder is a concentrated dry conditioner for freshwater and saltwater aquariums. This concentrated conditioning powder removes chlorine and chloramine from tap water, detoxifies nitrite and nitrate, and converts ammonia into a safe, non-toxic form for more efficient removal by the biofilter.

• Removes chlorine, chloramine and ammonia from water
• Detoxifies nitrite and nitrate
• Non-acidic, highly effective dry conditioner for fresh and saltwater

Seachem Safe Powder will not impact pH levels or overactivate skimmers. It may be used during tank cycling to alleviate ammonia/nitrite toxicity, during start-up or whenever adding or replacing water.

Note: Safe is the dry version of Seachem Prime and shares all of its advantages; however, Safe is even more concentrated than Prime.

Directions for Use:
Note: These directions supersede all other prior packaging.

Directions for 10 g and 50 g:
Use 100 mg Safe (scoop) per each 100 L (25 gallons) as needed to reduce chlorine and chloramine or per 25 L (6 gallons) for ammonia.

Directions for all other sizes:
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 gallons) for ammonia.

May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Silicone Sealant is a top-of-the-line 100% RTV silicone sealant designed to seal and repair freshwater and saltwater aquariums. The formula creates a permanently flexible, watertight seal with a high tensile strength that wont crack, dissolve or shrink from the pressure or stress caused by the weight of water in your tank. The solution provides unmatched adhesion and sports a clear color.

• High quality silicone sealant
• 100% RTV silicone
• Suitable for freshwater and saltwater aquariums
• Wont crack, dissolve or shrink
• Provides a watertight seal

The sealant is black in color and comes in a 3 oz tube.

Seachem Silicone Sealant is a top-of-the-line 100% RTV silicone sealant designed to seal and repair freshwater and saltwater aquariums. The formula creates a permanently flexible, watertight seal with a high tensile strength that wont crack, dissolve or shrink from the pressure or stress caused by the weight of water in your tank. The solution provides unmatched adhesion and sports a clear color.

• High quality silicone sealant
• 100% RTV silicone
• Suitable for freshwater and saltwater aquariums
• Wont crack, dissolve or shrink
• Provides a watertight seal

The sealant is clear in color and comes in a 3 oz tube.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Spot Pets Mop Pets make perfect chew buddies for dogs to exercise their natural gnawing urges. These squeaky plush toys feature heavy duty knotted ropes that are perfect for gripping, chewing and tugging.

• Perfect chew pals to satisfy a dogs natural urge to chew
• Knotted ropes for chewing and tugging
• Squeaky plush body and tough rope limbs

Dimensions: 12" long.

Note: Always supervise dogs during play.

Spots Pet Laser Pointer Toy is a single dot laser pointer that is the perfect entertainer for hours of enjoyment for your dog or cat.

• Laser pointer provides hours of enjoyment for dogs and cats
• Provides exercise and promotes chasing instinct
• Batteries included

Dogs and cats love the chase! Spots pet laser pointer toy is the perfect tool to get your pets chasing instinct going!.

Starmark Mental Stimulation toys help keep pets mentally engaged in an activity they enjoy. They help foster natural hunting and foraging behaviors and help prevent destructive boredom behaviors. The Starmark Ringer Bone offers an extremely durable new chewing challenge!.

• Treat Rings are held in place by inner rod and must be chewed to be removed
• Treats also fit sideways into toys between toy wall and inner rod
• Ring system encourages chewing
• Durable nylon material holds up to even the strongest chewers
• Easy to clean

With an adjustable venturi, the supreme hydroponic utility pump adds aeration into the nutrient-rich water flow, stimulating root growth. This pump uses time-proven magnetic drive technology and is energy efficient. It is capable of in-line or submersible operation.

• Models 2 through 18 incorporate an adjustable Venturi which adds Aeration into the nutrient rich water flow, stimulating root growth.
• 10 Power Cord on all models.
• Energy efficient and Oil-Free.
• Models 2 through 7 include: 1/2 Barb x 1/2" NPT Fitting.
• Models 9.5 through 18 include: 1/2 Barb x 3/4" NPT Fitting.

5-Year Limited Manufacturer Warranty.

With an adjustable venturi, the supreme hydroponic utility pump adds aeration into the nutrient-rich water flow, stimulating root growth. This pump uses time-proven magnetic drive technology and is energy efficient. It is capable of in-line or submersible operation.

• Models 2 through 18 incorporate an adjustable Venturi which adds Aeration into the nutrient rich water flow, stimulating root growth.
• 10 Power Cord on all models.
• Energy efficient and Oil-Free.
• Models 2 through 7 include: 1/2 Barb x 1/2" NPT Fitting.
• Models 9.5 through 18 include: 1/2 Barb x 3/4" NPT Fitting.

5-Year Limited Manufacturer Warranty.

The Via Aqua Flexible Air Stone bends and conforms to whatever shape you desire. With a variety of lengths available the options are limitless!.

• Self weighted to keep Flexible Air Stone at the bottom of the aquarium
• Bends in any direction desired
• Flexible Air Stone for Freshwater Aquarium Use Only
• Dual Air Input on Each End

The Via Aqua Slow Color Changing LED Light and Airstone use low voltage LED lamps that are self-weighted for simple installation. These LED lights will help add a new dimension to your tank and illuminate your water!.

• Great night light and tank illuminator
• Provides a color-changing air curtain
• Connect to an Air Pump and Airline (sold separately) to create a bubble wall in your aquarium

The Slow Color Changing LED Light and Airstone is perfect for brilliant color viewing and comes with a transformer, two suction cup brackets, and a wire suction cup.

Via Aqua LED Light and Airstone Slow Color Changing Specifications:
6" Long - 1.8 Watts - Has 6 Multicolor LEDs
12" Long - 2.7 Watts - Has 12 Multicolor LEDs
18" Long - 3.3 Watts - Has18 Multicolor LEDs.

Via Aqua Quartz Heaters are the new and improved version of glass heaters, featuring high-quality, submersible quartz glass with a visible temperature readout. Heaters are easy to install - just use the suction cups to secure your heater in the desired area.

• Fully submersible aquarium heaters
• High quality, break resistant quartz glass construction
• Visible temperature setting for accurate reading

Features suction cups to secure to your tank. Compatible with salt and freshwater tanks. Temperature range is adjustable from 68°-92°F.

Quartz Heater for Aquariums Specifications:
50 Watt: Aquariums up to 13 Gallons - (8.2" x 1.1")
100 Watt: Aquariums up to 25 Gallons - (10.7" x 1.1")
200 Watt: Aquariums up to 50 Gallons - (12.5" x 1.1")
300 Watt: Aquariums up to 80 Gallons - (14.8" x 1.1").

Simply roll out the plush green or brown carpet and cut to size as needed. Made from an absorbent, non-abrasive material that wont irritate sensitive feet, these liners are also treated with a biodegradable enzyme that reduces reptile odors. To clean, simply rinse with cold tap water and reuse. Ideal for juvenile reptiles that may accidentally ingest loose bedding when striking food. Zilla is committed to producing innovative products to build and maintain a healthy reptile habitat. From terrariums to bedding, lighting to decorZilla provides all the necessary components for the successful keeping of reptiles and amphibians.

• A low maintenance bedding, cut to size as needed
• Safe because it cannot be digested like other substrates, a good alternative especially for juvenile reptiles
• Treated to reduce odors
• Easy to clean with cold tap water
• Absorbent, non-abrasive material will not irritate reptiles

Sizes:
10 Gallon - 9.75"L x 19.75"W
20L/29 Gallon - 11.75"L x 29.5"W
30 Gallon - 11.75"L x 35.5"W
40/50 Gallon - 17.25"L x 35.25"W.

Simply roll out the plush green or brown carpet and cut to size as needed. Made from an absorbent, non-abrasive material that wont irritate sensitive feet, these liners are also treated with a biodegradable enzyme that reduces reptile odors. To clean, simply rinse with cold tap water and reuse. Ideal for juvenile reptiles that may accidentally ingest loose bedding when striking food. Zilla is committed to producing innovative products to build and maintain a healthy reptile habitat. From terrariums to bedding, lighting to decorZilla provides all the necessary components for the successful keeping of reptiles and amphibians.

• A low maintenance bedding, cut to size as needed
• Safe because it cannot be digested like other substrates, a good alternative especially for juvenile reptiles
• Treated to reduce odors
• Easy to clean with cold tap water
• Absorbent, non-abrasive material will not irritate reptiles

Sizes:
10 Gallon - 9.75"L x 19.75"W
20L/29 Gallon - 11.75"L x 29.5"W
30 Gallon - 11.75"L x 35.5"W
40/50 Gallon - 17.25"L x 35.25"W.

Simply roll out the plush green or brown carpet and cut to size as needed. Made from an absorbent, non-abrasive material that wont irritate sensitive feet, these liners are also treated with a biodegradable enzyme that reduces reptile odors. To clean, simply rinse with cold tap water and reuse. Ideal for juvenile reptiles that may accidentally ingest loose bedding when striking food. Zilla is committed to producing innovative products to build and maintain a healthy reptile habitat. From terrariums to bedding, lighting to decorZilla provides all the necessary components for the successful keeping of reptiles and amphibians.

• A low maintenance bedding, cut to size as needed
• Safe because it cannot be digested like other substrates, a good alternative especially for juvenile reptiles
• Treated to reduce odors
• Easy to clean with cold tap water
• Absorbent, non-abrasive material will not irritate reptiles

Sizes:
10 Gallon - 9.75"L x 19.75"W
20L/29 Gallon - 11.75"L x 29.5"W
30 Gallon - 11.75"L x 35.5"W
40/50 Gallon - 17.25"L x 35.25"W.

Zilla Desert Blend Ground English Walnut Shell is a sand substitute developed for desert-dwelling reptiles. Made from ground English walnut shells, it provides an attractive terrarium bedding. If ingested, this substrate will pass easily through your reptiles digestive system.

• Ideal for Bearded Dragons, Monitors, Skinks, Uromastyx
• Creates a natural and attractive desert environment
• Excellent heat conductor
• Stimulates natural digging and burrowing behaviors

Directions:
.

1. Pour into terrarium and landscape as desired. A substrate depth of one to two inches is recommended.
2. Remove animal waste and soiled bedding daily. Desert Blend Lizard Litter should be completely changed once a month.

Zilla Desert Blend Ground English Walnut Shell is a sand substitute developed for desert-dwelling reptiles. Made from ground English walnut shells, it provides an attractive terrarium bedding. If ingested, this substrate will pass easily through your reptiles digestive system.

• Ideal for Bearded Dragons, Monitors, Skinks, Uromastyx
• Creates a natural and attractive desert environment
• Excellent heat conductor
• Stimulates natural digging and burrowing behaviors

Directions:
.

1. Pour into terrarium and landscape as desired. A substrate depth of one to two inches is recommended.
2. Remove animal waste and soiled bedding daily. Desert Blend Lizard Litter should be completely changed once a month.

Zilla Terrarium Liners are absorbent, non-abrasive carpet sheets that provide an easy, hassle-free solution to reptile substrate. Liners are non-irritating to sensitive feet and feature a biodegradable enzyme that fights reptile odors.

• Absorbent, non-abrasive material will not irritate
• Safe - cannot be ingested
• Made from recycled materials

Terrarium liners are ideal for juvenile reptiles that might accidentally ingest loose bedding.

Dimensions:
10 Gallon: 9.75"L x 19.75"W
15/20H Gallon: 11.75"L x 23.5"W
20L/29 Gallon: 11.75"L x 29.5"W
40/50 Gallon: 17.25"L x 35.25"W
55 Gallon: 11.75"L x 47.5"W.

Installation: If required, cut to size with scissors. Place in bottom of terrarium. Add decorative items and food and water dishes.

Cleaning: Remove liner and rinse with cold tap water. Allow to air dry and replace in terrarium. Install new liner monthly or as needed.

Zilla Terrarium Liners are absorbent, non-abrasive carpet sheets that provide an easy, hassle-free solution to reptile substrate. Liners are non-irritating to sensitive feet and feature a biodegradable enzyme that fights reptile odors.

• Absorbent, non-abrasive material will not irritate
• Safe - cannot be ingested
• Made from recycled materials

Terrarium liners are ideal for juvenile reptiles that might accidentally ingest loose bedding.

Dimensions:
10 Gallon: 9.75"L x 19.75"W
15/20H Gallon: 11.75"L x 23.5"W
20L/29 Gallon: 11.75"L x 29.5"W
40/50 Gallon: 17.25"L x 35.25"W
55 Gallon: 11.75"L x 47.5"W.

Installation: If required, cut to size with scissors. Place in bottom of terrarium. Add decorative items and food and water dishes.

Cleaning: Remove liner and rinse with cold tap water. Allow to air dry and replace in terrarium. Install new liner monthly or as needed.

Zilla Terrarium Liners are absorbent, non-abrasive carpet sheets that provide an easy, hassle-free solution to reptile substrate. Liners are non-irritating to sensitive feet and feature a biodegradable enzyme that fights reptile odors.

• Absorbent, non-abrasive material will not irritate
• Safe - cannot be ingested
• Made from recycled materials

Terrarium liners are ideal for juvenile reptiles that might accidentally ingest loose bedding.

Dimensions:
10 Gallon: 9.75"L x 19.75"W
15/20H Gallon: 11.75"L x 23.5"W
20L/29 Gallon: 11.75"L x 29.5"W
40/50 Gallon: 17.25"L x 35.25"W
55 Gallon: 11.75"L x 47.5"W.

Installation: If required, cut to size with scissors. Place in bottom of terrarium. Add decorative items and food and water dishes.

Cleaning: Remove liner and rinse with cold tap water. Allow to air dry and replace in terrarium. Install new liner monthly or as needed.

Zilla Terrarium Liners are absorbent, non-abrasive carpet sheets that provide an easy, hassle-free solution to reptile substrate. Liners are non-irritating to sensitive feet and feature a biodegradable enzyme that fights reptile odors.

• Absorbent, non-abrasive material will not irritate
• Safe - cannot be ingested
• Made from recycled materials

Terrarium liners are ideal for juvenile reptiles that might accidentally ingest loose bedding.

Dimensions:
10 Gallon: 9.75"L x 19.75"W
15/20H Gallon: 11.75"L x 23.5"W
20L/29 Gallon: 11.75"L x 29.5"W
40/50 Gallon: 17.25"L x 35.25"W
55 Gallon: 11.75"L x 47.5"W.

Installation: If required, cut to size with scissors. Place in bottom of terrarium. Add decorative items and food and water dishes.

Cleaning: Remove liner and rinse with cold tap water. Allow to air dry and replace in terrarium. Install new liner monthly or as needed.

Zilla Terrarium Liners are absorbent, non-abrasive carpet sheets that provide an easy, hassle-free solution to reptile substrate. Liners are non-irritating to sensitive feet and feature a biodegradable enzyme that fights reptile odors.

• Absorbent, non-abrasive material will not irritate
• Safe - cannot be ingested
• Made from recycled materials

Terrarium liners are ideal for juvenile reptiles that might accidentally ingest loose bedding.

Dimensions:
10 Gallon: 9.75"L x 19.75"W
15/20H Gallon: 11.75"L x 23.5"W
20L/29 Gallon: 11.75"L x 29.5"W
40/50 Gallon: 17.25"L x 35.25"W
55 Gallon: 11.75"L x 47.5"W.

Installation: If required, cut to size with scissors. Place in bottom of terrarium. Add decorative items and food and water dishes.

Cleaning: Remove liner and rinse with cold tap water. Allow to air dry and replace in terrarium. Install new liner monthly or as needed.