San Francisco Bay Brands

SeaChem Cupramine is superior to copper sulfate, chloride and citrate: it is non-acidic, less toxic to fish, remains in solution, and does not contaminate the filter bed. Seachem Cupramine is superior to traditional chelates: it is fully charged (ionic), active at low concentrations, and is can be removed from your water with carbon.

• Buffered active copper
• For marine or freshwater
• Less toxic, superior to and safer than copper chlorides, sulfates, citrates and chelates

Seachem Flourish Iron is a highly concentrated iron supplement for aquariums with live plants. Its simple, pure formula is ideal for iron deficiencies and/or situations when iron requirements are greater than what Seachem Flourish can provide.

• Iron supplement for the planted aquarium
• Highly concentrated (10,000 mg/L) ferrous iron
• Contains no phosphate or nitrate

Flourish Iron contains 10,000 mg/L of ferrous iron (Fe+2) gluconate, a highly effective form of iron that provides greater benefits than ferric state EDTA-iron (Fe+3) sources used in other iron supplements. Plants can only utilize iron in the ferrous state, and must expend extra physiological energy just to make ferric iron supplements usable. Flourish Iron provides plants the iron they need directly, saving time and reducing stress on your plants.

Use Flourish Iron in those cases where iron requirements exceed that which can be delivered by standard Seachem Flourish at the recommended dose, or when signs of iron deficiency appear (including short, slender stems or yellowing between veins).

Directions: Use 1 capful (5 mL) for each 200 L (50 gallons) of water, or as required to maintain about 0.10 mg/L iron. For smaller doses please note that each cap thread is about 1 mL. Use a test kit to monitor iron concentrations. Use as needed to combat signs of iron deficiency (usually seen in new growth).

Guaranteed Analysis:
Iron (Fe) - 1.0%.

Seachem Flourish Iron is a highly concentrated iron supplement for aquariums with live plants. Its simple, pure formula is ideal for iron deficiencies and/or situations when iron requirements are greater than what Seachem Flourish can provide.

• Iron supplement for the planted aquarium
• Highly concentrated (10,000 mg/L) ferrous iron
• Contains no phosphate or nitrate

Flourish Iron contains 10,000 mg/L of ferrous iron (Fe+2) gluconate, a highly effective form of iron that provides greater benefits than ferric state EDTA-iron (Fe+3) sources used in other iron supplements. Plants can only utilize iron in the ferrous state, and must expend extra physiological energy just to make ferric iron supplements usable. Flourish Iron provides plants the iron they need directly, saving time and reducing stress on your plants.

Use Flourish Iron in those cases where iron requirements exceed that which can be delivered by standard Seachem Flourish at the recommended dose, or when signs of iron deficiency appear (including short, slender stems or yellowing between veins).

Directions: Use 1 capful (5 mL) for each 200 L (50 gallons) of water, or as required to maintain about 0.10 mg/L iron. For smaller doses please note that each cap thread is about 1 mL. Use a test kit to monitor iron concentrations. Use as needed to combat signs of iron deficiency (usually seen in new growth).

Guaranteed Analysis:
Iron (Fe) - 1.0%.

Seachem Flourish is a comprehensive plant supplement for the natural freshwater aquarium. Its rich assortment of important micro elements, trace elements and other nutrients promotes healthy, vigorous growth, health and color in aquatic plants.

• Comprehensive freshwater aquarium plant supplement
• Contains rich assortment of important micro elements
• Helps keep plants healthy and beautiful

Seachem Flourish provides essential micronutrients to encourage vigorous, healthy growth of live freshwater aquatic plants, including calcium, magnesium, iron and other important elements with proven benefits for aquatic plants. This base of micro-nutrients supports macro element (NPK) fertilization in your aquarium.

Flourish provides a wide variety of micro-nutrients, but may also be used with nutrient-specific supplements (including Flourish Nitrogen, Flourish Phosphorus or Flourish Potassium) as needed. Other manufacturers try to include ALL necessary nutrients in one supplement, leading to overdoses of micro-nutrients in an attempt to raise macro-nutrient levels.

Directions: Use 1 capful (5 mL) for each 250 L (60 gallons) once or twice a week. For smaller doses, please note that each cap thread is approximately 1 mL. Refrigeration after opening is recommended but not required.

Guaranteed Analysis:
Total Nitrogen - 0.07%
Available Phosphate (P2O5) - 0.01%
Soluble Potash - 0.37%
Calcium (Ca) - 0.14%
Magnesium (Mg) - 0.11%
Sulfur (S) - 0.27%
Boron (B) - 0.009%
Chlorine (Cl) - 1.15%
Cobalt (Co) - 0.0004%
Copper (Cu) - 0.0001%
Iron (Fe) - 0.32%
Manganese (Mn) - 0.01%
Molybdenum (Mo) - 0.0009%
Sodium (Na) - 0.13%
Zinc (Zn) - 0.0007%.

Seachem Flourish is a comprehensive plant supplement for the natural freshwater aquarium. Its rich assortment of important micro elements, trace elements and other nutrients promotes healthy, vigorous growth, health and color in aquatic plants.

• Comprehensive freshwater aquarium plant supplement
• Contains rich assortment of important micro elements
• Helps keep plants healthy and beautiful

Seachem Flourish provides essential micronutrients to encourage vigorous, healthy growth of live freshwater aquatic plants, including calcium, magnesium, iron and other important elements with proven benefits for aquatic plants. This base of micro-nutrients supports macro element (NPK) fertilization in your aquarium.

Flourish provides a wide variety of micro-nutrients, but may also be used with nutrient-specific supplements (including Flourish Nitrogen, Flourish Phosphorus or Flourish Potassium) as needed. Other manufacturers try to include ALL necessary nutrients in one supplement, leading to overdoses of micro-nutrients in an attempt to raise macro-nutrient levels.

Directions: Use 1 capful (5 mL) for each 250 L (60 gallons) once or twice a week. For smaller doses, please note that each cap thread is approximately 1 mL. Refrigeration after opening is recommended but not required.

Guaranteed Analysis:
Total Nitrogen - 0.07%
Available Phosphate (P2O5) - 0.01%
Soluble Potash - 0.37%
Calcium (Ca) - 0.14%
Magnesium (Mg) - 0.11%
Sulfur (S) - 0.27%
Boron (B) - 0.009%
Chlorine (Cl) - 1.15%
Cobalt (Co) - 0.0004%
Copper (Cu) - 0.0001%
Iron (Fe) - 0.32%
Manganese (Mn) - 0.01%
Molybdenum (Mo) - 0.0009%
Sodium (Na) - 0.13%
Zinc (Zn) - 0.0007%.

Seachem Flourish is a comprehensive plant supplement for the natural freshwater aquarium. Its rich assortment of important micro elements, trace elements and other nutrients promotes healthy, vigorous growth, health and color in aquatic plants.

• Comprehensive freshwater aquarium plant supplement
• Contains rich assortment of important micro elements
• Helps keep plants healthy and beautiful

Seachem Flourish provides essential micronutrients to encourage vigorous, healthy growth of live freshwater aquatic plants, including calcium, magnesium, iron and other important elements with proven benefits for aquatic plants. This base of micro-nutrients supports macro element (NPK) fertilization in your aquarium.

Flourish provides a wide variety of micro-nutrients, but may also be used with nutrient-specific supplements (including Flourish Nitrogen, Flourish Phosphorus or Flourish Potassium) as needed. Other manufacturers try to include ALL necessary nutrients in one supplement, leading to overdoses of micro-nutrients in an attempt to raise macro-nutrient levels.

Directions: Use 1 capful (5 mL) for each 250 L (60 gallons) once or twice a week. For smaller doses, please note that each cap thread is approximately 1 mL. Refrigeration after opening is recommended but not required.

Guaranteed Analysis:
Total Nitrogen - 0.07%
Available Phosphate (P2O5) - 0.01%
Soluble Potash - 0.37%
Calcium (Ca) - 0.14%
Magnesium (Mg) - 0.11%
Sulfur (S) - 0.27%
Boron (B) - 0.009%
Chlorine (Cl) - 1.15%
Cobalt (Co) - 0.0004%
Copper (Cu) - 0.0001%
Iron (Fe) - 0.32%
Manganese (Mn) - 0.01%
Molybdenum (Mo) - 0.0009%
Sodium (Na) - 0.13%
Zinc (Zn) - 0.0007%.

Seachem Flourish is a comprehensive plant supplement for the natural freshwater aquarium. Its rich assortment of important micro elements, trace elements and other nutrients promotes healthy, vigorous growth, health and color in aquatic plants.

• Comprehensive freshwater aquarium plant supplement
• Contains rich assortment of important micro elements
• Helps keep plants healthy and beautiful

Seachem Flourish provides essential micronutrients to encourage vigorous, healthy growth of live freshwater aquatic plants, including calcium, magnesium, iron and other important elements with proven benefits for aquatic plants. This base of micro-nutrients supports macro element (NPK) fertilization in your aquarium.

Flourish provides a wide variety of micro-nutrients, but may also be used with nutrient-specific supplements (including Flourish Nitrogen, Flourish Phosphorus or Flourish Potassium) as needed. Other manufacturers try to include ALL necessary nutrients in one supplement, leading to overdoses of micro-nutrients in an attempt to raise macro-nutrient levels.

Directions: Use 1 capful (5 mL) for each 250 L (60 gallons) once or twice a week. For smaller doses, please note that each cap thread is approximately 1 mL. Refrigeration after opening is recommended but not required.

Guaranteed Analysis:
Total Nitrogen - 0.07%
Available Phosphate (P2O5) - 0.01%
Soluble Potash - 0.37%
Calcium (Ca) - 0.14%
Magnesium (Mg) - 0.11%
Sulfur (S) - 0.27%
Boron (B) - 0.009%
Chlorine (Cl) - 1.15%
Cobalt (Co) - 0.0004%
Copper (Cu) - 0.0001%
Iron (Fe) - 0.32%
Manganese (Mn) - 0.01%
Molybdenum (Mo) - 0.0009%
Sodium (Na) - 0.13%
Zinc (Zn) - 0.0007%.

Seachem Flourish Potassium provides concentrated potassium to support vigorous growth in aquariums with natural, living plants. This safe, effective supplement helps you avoid potassium depletion, yellowing leaves, and limited plant growth.

• Potassium supplement for the planted aquarium
• Helps maintain a vigorous level of plant growth
• Helps resolve yellowing, death/browning and weak stems and roots

Flourish Potassium contains 50,000 mg/L of potassium - one of the highest concentrations available. Water with low mineral content or systems with rapidly growing live plants can quickly deplete available potassium, causing potassium to become the limiting factor for further growth. Use Flourish Potassium to prevent potassium depletion (signs of which include yellowing in older leaves) and maintain the highest level of growth.

Potassium is most easily obtained from potassium nitrate and potassium phosphate, both of which add either nitrogen or phosphorus to the water and make it more difficult to maintain a specific NPK ratio. However, Flourish Potassium is derived from potassium sulfate, which lets you adjust potassium levels without affecting your tanks nitrogen or phosphorus.

Directions: Use 1 capful (5 mL) for every 125 L (30 gallons). This dose raises potassium by 2 mg/L. Repeat 2–3 times per week or as needed (in response to signs of potassium deficiency in older leaves which includes: chlorosis (yellowing), necrosis (death/browning), and weak stems and roots).

Guaranteed Analysis:
Soluble Potassium (K2O) - 5.8%.

Seachem Flourish Tablets are rich in essential trace elements, amino acids, vitamins, and minerals to stimulate healthy growth in aquatic plant roots. They contain no phosphate or nitrate and do not support the growth of nuisance algae.

• Gravel bed supplement for the planted aquarium
• Growth stimulating tablets for plant roots
• Source of micro elements, trace elements and other essential nutrients

These convenient tabs are rich in iron, manganese, magnesium, calcium, potassium, inositol, choline B12, biotin, and other factors that are beneficial for aquatic plant roots. Theyre an ideal aid for the beginner, with all the nutrients found in Seachem Flourish compressed into an easy-to-use, pre-dosed tablet. Once inserted into the gravel, Flourish Tabs provide direct, time-released fertilization to the root zone. Roots then perform enzymatic action on the tabs, slowly releasing nutrients in healthy doses. Ten tablets will treat a 12"x30" plant bed twice. For best results, use in combination with Flourish.

Directions: Insert one Flourish Tab in the gravel for every 10-15 cm (4"-6") radius. A standard 10 gallon aquarium requires 6 tabs. Distribute the tablets evenly throughout the gravel bed. Add new tablets once every 1-3 months for optimal plant growth. Tabs will not alter pH, but, in very soft or unbuffered water, they have slightly acidic properties similar to peat moss.

Guaranteed Analysis:
Total Nitrogen - 0.28%
Available Phosphate - 0.17%
Soluble Potash - 0.16%
Calcium - 14.9%
Magnesium - 0.06%
Sulfur - 12.2%
Boron - 0.029%
Chlorine - 0.55%
Cobalt - 0.001%
Copper - 0.001%
Iron - 2.2%
Manganese - 0.23%
Molybdenum - 0.0009%
Sodium - 0.14%
Zinc - 0.0024%.

Seachem Flourish Tablets are rich in essential trace elements, amino acids, vitamins, and minerals to stimulate healthy growth in aquatic plant roots. They contain no phosphate or nitrate and do not support the growth of nuisance algae.

• Gravel bed supplement for the planted aquarium
• Growth stimulating tablets for plant roots
• Source of micro elements, trace elements and other essential nutrients

These convenient tabs are rich in iron, manganese, magnesium, calcium, potassium, inositol, choline B12, biotin, and other factors that are beneficial for aquatic plant roots. Theyre an ideal aid for the beginner, with all the nutrients found in Seachem Flourish compressed into an easy-to-use, pre-dosed tablet. Once inserted into the gravel, Flourish Tabs provide direct, time-released fertilization to the root zone. Roots then perform enzymatic action on the tabs, slowly releasing nutrients in healthy doses. Ten tablets will treat a 12"x30" plant bed twice. For best results, use in combination with Flourish.

Directions: Insert one Flourish Tab in the gravel for every 10-15 cm (4"-6") radius. A standard 10 gallon aquarium requires 6 tabs. Distribute the tablets evenly throughout the gravel bed. Add new tablets once every 1-3 months for optimal plant growth. Tabs will not alter pH, but, in very soft or unbuffered water, they have slightly acidic properties similar to peat moss.

Guaranteed Analysis:
Total Nitrogen - 0.28%
Available Phosphate - 0.17%
Soluble Potash - 0.16%
Calcium - 14.9%
Magnesium - 0.06%
Sulfur - 12.2%
Boron - 0.029%
Chlorine - 0.55%
Cobalt - 0.001%
Copper - 0.001%
Iron - 2.2%
Manganese - 0.23%
Molybdenum - 0.0009%
Sodium - 0.14%
Zinc - 0.0024%.

Seachem Flourite is an all natural porous clay gravel substrate, specially broken and mineral-enriched to enhance live aquarium plant growth. It requires no gravel modifiers and never needs to be replaced, remaining effective for the life of the aquarium.

• Premium natural substrate for the planted aquarium
• Good for life of aquarium, no replacement necessary
• All natural porous clay composition

Though its appearance is best suited for planted aquariums, Flourite may be used in any aquarium. It is most effective when used alone as an integral substrate bed, but it may also be mixed with other gravels. Flourite is not chemically coated or treated, and will not alter the pH of your aquarium water.

Directions: Flourite is pre-washed, but may be rinsed before use to remove any residual dust. Residual dust can also be minimized by filling the aquarium slowly while evenly dispersing the water to avoid disturbing the Flourite bed. Some slight initial cloudiness is normal and will clear quickly, within 2-12 hours. Mechanical filtration and Seachem Clarity can be used to resolve cloudiness even more quickly.

Tip: To minimize cloudiness from residual dust, place Flourite in a bowl in the aquarium and add water directly to the bowl, allowing water to overflow softly on to the gravel bed.

Note: This package does not feature a mesh bottom.

Composition:
Aluminum - 10,210 mg/kg
Barium - 124 mg/kg
Calcium - 195 mg/kg
Cobalt - 6 mg/kg
Chromium - 13 mg/kg
Copper - 17 mg/kg
Iron - 18,500 mg/kg
Potassium - 2,195 mg/kg
Magnesium - 2,281 mg/kg
Manganese - 64 mg/kg
Sodium - 223 mg/kg
Nickel - 12 mg/kg
Vanadium - 15 mg/kg
Zinc - 29 mg/kg.

Seachem Reef Iodide is an important element required by invertebrates and many soft corals (gorgonians, sarcophytons, etc). Reef Iodide is a concentrated (8,000 mg/L) stabilized potassium iodide source for reef aquaria that will restore and maintain iodide levels to those found in natural seawater.

• Raises Iodide levels in reef aquariums to levels found in natural sea water
• Reef iodide contains no toxic iodide, only safe iodide
• Reef Iodide is important for the essential growth of soft tissue

Reef Iodide is formulated to provide a safe and easy-to-use source of iodide that will not convert to toxic-free iodine under storage or reef conditions.

DIRECTIONS: For beginner use, add 5 mL (1 capful) for each 200 L (US 50 gallons) every other day.

Seachem Reef Plus is a full spectrum reef supplement containing trace elements, vitamins, and amino acids demonstrated to have a positive impact on the growth of corals and other desirable reef creatures.

• Concentrated vitamin and amino acid supplement
• Use 10mL for every 40 gallons of saltwater
• For saltwater aquarium use only

Seachem Reef Plus is formulated to provide nutrients available from natural tropical reef waters. Contains vitamin B12, vitamin C, thiamine, inositol, choline, iodide, and other essential constituents at pH 8.3. Reef Plus is nitrate/phosphate free.

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

• Premium slime coat protection product for fresh and saltwater aquariums
• Reduces stress when handling or transporting fish
• Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

• Premium slime coat protection product for fresh and saltwater aquariums
• Reduces stress when handling or transporting fish
• Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

• Premium slime coat protection product for fresh and saltwater aquariums
• Reduces stress when handling or transporting fish
• Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.