Seachem De-Nitrate Nitrate Remover

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

• Availability: Out of Stock
• Model: SCP97216
• Brand: Scott Pet